English
Izingxenye Zomshini We-CNC

Izingxenye Zomshini We-CNC

Isevisi Yomshini We-CNC Ku-inthanethi

Siyakwamukela enkonzweni yethu yokulungisa imishini ye-CNC, lapho iminyaka engaphezu kwengu-20 yesipiliyoni sokulungisa imishini ihlangabezana nobuchwepheshe obusezingeni eliphezulu.

Amakhono Ethu:

●Imishini Yokukhiqiza:Imishini ye-CNC enama-axis amathathu, ama-axis amane, ama-axis amahlanu, kanye nama-axis ayi-6

●Izindlela Zokucubungula:Ukujika, ukugaya, ukubhoboza, ukugaya, i-EDM, kanye nezinye izindlela zomshini

●Izinto zokwakha:I-aluminium, ithusi, insimbi engagqwali, i-titanium alloy, ipulasitiki, nezinto ezihlanganisiwe

Amaphuzu Avelele Esevisi:

●Inani Elincane Le-oda:Isiqephu esisodwa

●Isikhathi Sesilinganiso:Kungakapheli amahora amathathu

●Isikhathi Sesampula Sokukhiqiza:Izinsuku ezi-1-3

●Isikhathi Sokulethwa Ngobuningi:Izinsuku ezingu-7-14

●Amandla Okukhiqiza Kwanyanga Zonke:Izingcezu ezingaphezu kuka-300,000

Izitifiketi:

●I-ISO9001: Uhlelo Lokuphatha Ikhwalithi

●I-ISO13485: Uhlelo Lokuphathwa Kwekhwalithi Yamadivayisi Ezokwelapha

●I-AS9100: Uhlelo Lokuphathwa Kwekhwalithi Yezindiza

●IATF16949: Uhlelo Lokuphathwa Kwekhwalithi Yezimoto

●I-ISO45001:2018: Uhlelo Lokuphathwa Kwezempilo Nokuphepha Emsebenzini

●I-ISO14001:2015Uhlelo Lokuphathwa Kwemvelo

Xhumana nathiukuze wenze ngezifiso izingxenye zakho zokunemba futhi usebenzise ulwazi lwethu olubanzi lomshini.

123456Okulandelayo >>> Ikhasi 1 / 14

Imibuzo Evame Ukubuzwa


1.Yiziphi izinto ozisebenzisayo?


Sisebenzisa imishini ehlukahlukene yezinsimbi namapulasitiki okuhlanganisa i-aluminium (6061, 5052), insimbi engagqwali (304, 316), insimbi yekhabhoni, ithusi, ithusi, izinsimbi zamathuluzi, kanye nepulasitiki yobunjiniyela (i-Delrin/Acetal, i-Nylon, i-PTFE, i-PEEK). Uma udinga i-alloy ekhethekile, sitshele izinga futhi sizoqinisekisa ukuthi kungenzeka yini.


 


2.Yikuphi ukubekezelelana nokunemba ongakufinyelela?


Ukubekezelelana okujwayelekile kokukhiqiza kucishe kube ngu-±0.05 mm (±0.002"). Ezingxenyeni ezinembe kakhulu singafinyelela u-±0.01 mm (±0.0004") kuye ngokuthi i-geometry, izinto zokwakha, kanye nobuningi. Ukubekezelelana okuqinile kungadinga izinto ezikhethekile, ukuhlolwa, noma imisebenzi yesibili — sicela ucacise emdwebweni.


 


3.Yimaphi amafomethi nolwazi oludingayo ukuze uthole ikhotheshini?


Amafomethi e-3D akhethwayo: STEP, IGES, Parasolid, SolidWorks. 2D: DXF noma PDF. Faka ubuningi, izinto/ibanga, ukubekezelelana okudingekayo, ukuqeda kwendawo, kanye nanoma yiziphi izinqubo ezikhethekile (ukwelashwa kokushisa, ukucwebezela, ukuhlanganiswa) ukuze uthole isilinganiso esinembile.


 


4.Yikuphi ukuqedwa kwendawo kanye nemisebenzi yesibili enikunikezayo?


Izinsizakalo ezijwayelekile nezikhethekile zifaka phakathi i-anodizing, i-black oxide, i-plating (i-zinc, i-nickel), i-passivation, i-powder coating, i-polishing, i-bead blasting, ukwelashwa kokushisa, ukuthepha/ukugoqa intambo, ukugoqa, kanye nokuhlanganisa. Singakwazi ukuhlanganisa imisebenzi yesibili emsebenzini wokukhiqiza ngokwezidingo zakho.


 


5.Zithini izikhathi zakho zokuhola kanye nobuningi be-oda elincane (i-MOQ)?


Izikhathi zokulethwa zincike ebunzimeni kanye nobuningi. Amabanga ajwayelekile: ama-prototype/amasampula angawodwa — izinsuku ezimbalwa kuya emavikini ama-2; ukukhiqizwa — amasonto angu-1–4. I-MOQ iyahlukahluka ngokwengxenye nangenqubo; sivame ukusingatha ama-prototypes angama-single kanye nokuqhutshwa okuncane kuze kufike kuma-oda amaningi — sitshele inani lakho kanye nesikhathi sokugcina sesikhathi esithile.


 


6.Uqinisekisa kanjani ikhwalithi yezingxenye kanye nezitifiketi?


Sisebenzisa amathuluzi okulinganisa alinganisiwe (i-CMM, ama-caliper, ama-micrometer, abahloli bokurhabaxa kobuso) futhi silandela izinhlelo zokuhlola ezifana nokuhlolwa kwesihloko sokuqala (i-FAI) kanye nokuhlolwa kobukhulu obuyi-100% uma kudingeka. Singahlinzeka ngezitifiketi zezinto (ama-MTR), imibiko yokuhlola, futhi sisebenze ngaphansi kwezinhlelo zekhwalithi (isb., i-ISO 9001) — sicacise izitifiketi ezidingekayo uma sicela ikhotheshini.